Power host size?18.7*8.2*3.3cm(7.4"*3.2"1.3")
Power host weight: about 2.2 lb
Rated output?5V/2A;12V/1A;16V/2A;19V/3.5A;12V/300A(Car output)
Accessories lists?jumper clamps * 1,home charger * 1?car charger * 1,4 in 1 mobile phone Charging cable * 1?Computer adapter * 8?English manual * 1?Bag * 1
1: It takes about 3 hours to fully charge the product. Turn on the ON button and charge the product.
2: To start the car, you need to turn the switch OFF.
3: The peak 600A double-displacement is 60C. It is possible to start gasoline vehicles with a displacement of 6.0 or less and diesel vehicles with a displacement of 2.0 or less. (Except for engine aging cars.)
4: The product is not used for a long time, it is recommended to charge one time in 3 months.
5: The product needs to be placed at normal temperature, which is beneficial to the use of the product.
6?When starting the car, the blue indicator light is best to be more than 60%.
7:If the car can not start (1-2 times), do not force to continue to start, you should further check whether the battery clip is not clipped, whether the plug is loose, otherwise it will burn the fuse and damage the boot power phenomenon.
8:To start the car for the first time, you need to put the emergency power off and charge it with the charger before you start the car.
Battery Type: Polymer Battery Pack?Quickly jump starts vehicles,great for up to 6.0L gas or 4.0L diesel engine
Large capacity:This power device is 20,000 MAH capacity, can charge mobile phones, tablets, game consoles, Bluetooth headsets, cameras and other electronic devices to avoid power outages. Our emergency power supply is very small and easy to carry.
New features: digital display, waterproof and dustproof, compass, emergency hammer, 4 USB output ports, 4 emergency lights (SOS rescue lights)
Protection: The high quality and spray gold intelligent jumper clamps has over current protection, short circuit protection, overload protection, over-voltage protection, over- charge protection.
Main light has two modes:Illumination/SOS.Press and hold the switch for 3 seconds to turn on the LED light. In long bright mode, press the switch to enter the SOS rescue blinking mode